歡迎來到 Wargaming.net Wiki!
Plane
討論
變換
檢視
原始碼
檢視歷史
搜尋
例如:
遊戲
戰車世界
戰機世界
戰艦世界
戰車世界:點將錄
戰車世界:閃擊戰
戰車世界:家用主機版
導覽
首頁
Wiki discussion
Purge page cache
隨機頁面
近期變動
使用說明
《戰車世界》網站
《戰機世界》網站
《戰艦世界》網站
《戰車世界:閃擊戰》網站
《戰車世界:家用主機版》網站
工具箱
連入頁面
相關頁面修訂記錄
特殊頁面
頁面資訊
首頁
/
World of Warplanes
/
Mitsubishi A7M Reppu
Mitsubishi A7M Reppu
←
Plane:A7m
跳轉到:
導覽
、
搜尋
根據以下的原因,您並無權限去做編輯這個頁面:
您剛才的請求只有這些使用者組的使用者才能使用:
使用者
、
貢獻者
想要編輯頁面庫,您在 Wargaming.net 世界的遊戲戰鬥數必須不低於 100 場。
你可以檢視並複製本頁面的原始碼。
{{PlaneData|Plane= |InTheGame_pros= |InTheGame_cons= |InTheGame_performance= |InTheGame_research= |History= Towards the end of 1940, the Imperial Japanese Navy asked Mitsubishi to start design on a 16-Shi carrier-based fighter, which would be the successor to the carrier-based Zero. At that time, however, there were no viable high-output, compact engines to use for a new fighter. In addition, Jiro Horikoshi's team was preoccupied with addressing early production issues with the A6M2b as well as starting development on the A6M3 and the 14-Shi interceptor (which would later become the Mitsubishi J2M Raiden, a land-based interceptor built to counter high-altitude bombers). As a result, work on the Zero successor was halted in January 1941. In April 1942, the development of the A6M3 and the 14-Shi interceptor was complete, and the Japanese Navy once again tasked Mitsubishi and Horikoshi's team with designing a new Zero successor to become the Navy Experimental 17-shi Ko (A) Type Carrier Fighter Reppu. In July 1942 the Navy issued specifications for the fighter: it had to fly faster than 345 kn (639 km/h) above 6,000 m, climb to 6,000 m in less than 6 minutes, be armed with two 20 mm cannon and two 13 mm machine guns, and retain the maneuverability of the A6M3. As before, one of the main hurdles was engine selection. To meet the specifications the engine would need to produce at least 2,000 hp, which narrowed choices down to Nakajima's NK9 (Ha-45) or Mitsubishi's MK9 (Ha-43), which were both under development. The early NK9 had less output but was already approved by the Navy for use on the Yokosuka P1Y Ginga, while the larger MK9 promised more horsepower. With the larger, more powerful engine, wing loading became an issue. The Navy requested at most 150 kg/m², but wanted 130 kg/m² which complicated design considerations further. With the NK9 it could achieve 150 kg/m², but with the less power it would not meet the specifications for maximum speed. With the MK9 the engineers concluded it could fulfill the requirements; however, production of the MK9 was delayed compared to the NK9, and the Japanese Navy instructed Mitsubishi to use the NK9. Work on the 17-Shi was further delayed by factories prioritizing A6M and Mitsubishi G4M production as well as further work on A6M variants and addressing Raiden issues. As a result, the 17-Shi, which became the A7M1, officially flew for the first time on 6 May 1944, four years after development started. The aircraft demonstrated excellent handling and maneuverability, but was underpowered as Mitsubishi engineers feared, and with a top speed similar to the A6M5 Zero. It was a disappointment, and the Navy ordered development to stop on 30 July 1944, but Mitsubishi obtained permission for development to continue using the Ha-43 engine, flying with the completed Ha-43 on 13 October 1944. The A7M2 now achieved a top speed of 628 km/h, while climb and other areas of performance surpassed the Zero, leading the Navy to change its mind and adopt the craft. The A7M2 was also equipped with automatic combat flaps, used earlier on the Kawanishi N1K-J, significantly improving maneuverability. On June 1945, ace pilot Saburo Sakai was ordered to Nagoya to test the airplane. He declared it to be the fastest fighter he had ever seen, able to surpass anything on the air, Japanese or American. He claimed it could fly in circles, while ascending, around a Hellcat or a Mustang, and that engineers stated it could fight at up to 12,000 meters. While it was hoped that the A7M would replace the A6M, production was disrupted by an earthquake on December 1944 in the Nagoya region, and Allied bombing raids on 11 March 1944, which caused the loss of full scale drawings and jigs for the Sam 12 (A7M2) and Ki-83. Only nine aircraf were completed by the end of the war. The type never saw combat. |HistoricalGallery= |Ref_references= |Ref_sources= |Ref_links= }}
此頁面包含以下模板:
模板:!
(
檢視原始碼
)
模板:History
(
檢視原始碼
)
模板:PlaneData
(
檢視原始碼
)
返回到
Plane:A7m
。
您的位置:
想要登入,請選擇您帳號 所註冊的地區
歐洲
北美
亞洲
或使用 Microsoft 登入來進入 WoT XBOX 生態系統
登入
不再顯示這個對話框