A tank's gun, typically a cannon, is the tank's main weapon. The gun caliber is not the only factor in its overall performance; one must also look at the penetration and rate of fire as very important considerations when choosing a gun. Longer guns tend to have more accuracy and penetration because more of the gunpowder is burned while the shell is in the barrel, resulting in greater acceleration. Not all guns that are available for a tank can be mounted on any turret. If there is a turret module preceding a gun on a tank tech tree, you will probably need to research, buy, and install it before mounting the gun. A destroyed gun will lock, it will prevent the tank from firing until it is repaired, and a damaged gun will fire with drastically-reduced accuracy.
Damage - The amount of hit points the shell takes from the enemy tank with a hit. Measured in HP (Hit Points), The gun damage statistics are usually written in a format such as #/#/#: referring to the shell types available for the gun, usually AP/APCR/HE ammo types.
Penetration - The penetration of the weapon refers to the amount of flat metal armor the gun can penetrate in millimeters (mm). Penetration is calculated as if firing at flat armor at a range of 100m, and is usually written in the #/#/# format. Again, this refers to the different shell types available for the gun.
Shells - The available shell types for the guns are determined by the color of the damage and penetration attributes: AP, APCR, HE, HEAT. For more info, see Ammo.
Rate of Fire - The rate of fire of a gun is the number of shells that can be fired in a particular span of time, also known as RoF. The rate of fire of a gun is measured in rounds per minute, and for conventional guns is another way to to state the reload time. For guns equipped with a magazine, the given rate of fire is the sustained rate of fire, or the average firing rate including the magazine reload time, not the burst firing rate of a single magazine.
Accuracy - The accuracy of the gun is the maximum shell dispersion when the sights are fully closed/contracted. The accuracy of a gun is measured in meters, indicating the amount of dispersion when fired at a target at a distance of 100m. The shell dispersion is also effected by Gaussian distribution.
Aim Time - The time it takes in seconds for a gun to come to full aim.
|Tier||Name||Ammo||Damage||Penetration||Rate of Fire||Accuracy||Aim Time||Price||Weight||Compatibility|
|I||37 mm Gun APX SA18||237||30/30/36 HP||29/46/18 mm||r/m24||m0.54||s2-2.3||0||kg110||Renault NC-31|
|I||13,2 mm Hotchkiss mle. 1930||720||8/8 HP||23/36 mm||r/m136.36||m0.58||s2||1,600||kg38||Renault NC-31|
|I||37 mm Gun KwK 36 L/46.5||100-160||36/36/42 HP||40/74/18 mm||r/m26.09-28.57||m0.46||s1.7-2||1,900||kg100||Renault NC-31, Vickers Mk. E Type B|
|II||47 mm Vickers QF||50-96||50/50/65 HP||45/70/23 mm||r/m16.67-18.18||m0.48||s2.3-2.9||1,900||kg100||Vickers Mk. E Type B|
|II||45 mm 20K||120-136||47/47/62 HP||51/88/23 mm||r/m26.09||m0.46||s1.7-2.3||2,530||kg313||Vickers Mk. E Type B, Type 2597 Chi-Ha|
|II||57mm Type 97||120||75/75/95 HP||30/55/28 mm||r/m20||m0.46||s2.3||3,000||kg150||Type 2597 Chi-Ha|
|III||37 mm M6||123-147||40/40/50 HP||56/78/19 mm||r/m26.09||m0.42||s1.7||8,350||kg84||M5A1 Stuart|
|IV||40 mm Pom Pom||160||45/45/60 HP||49/71/23 mm||r/m24.3||m0.48||s2.3||20,000||kg160||Vickers Mk. E Type B|
|IV||47 mm Type 1||61-104||70/70/90 HP||81/131/25 mm||r/m20-24||m0.42-0.44||s2.3||21,000||kg350||Type 2597 Chi-Ha, M5A1 Stuart|
|IV||76mm F-34||100||110/110/156 HP||86/102/38 mm||r/m15.79||m0.46||s2.3||30,550||kg538||Type T-34|
|V||57 mm 55-57FG||70-100||85/85/95 HP||112/189/29 mm||r/m20-26.09||m0.34||s2.3||48,000||kg448||Type T-34, 59-16|
|V||76 mm 54-76T||45||115/115/165 HP||85/106/38 mm||r/m16.22-17.65||m0.36||s2.3||49,000||kg550||59-16|
|VI||Type 62-85TS||47||180/180/300 HP||145/250/43 mm||r/m10.53||m0.37||s2.3||kg1,500||Type 62|
|VI||76 mm 54-76T (Autoloader)||45-60||115/115/165 HP||85/106/38 mm||r/m19.57-21.38||m0.36||s2.3||69,000||kg1,000||59-16, WZ-131|
|VI||85 mm S-53||50-60||160/160/280 HP||120/161/43 mm||r/m12-13.33||m0.42||s2.3-2.9||61,530||kg1,550||Type 58, T-34-1, T-34-2|
|VI||85 mm 56-85JT||47-60||160/160/280 HP||128/172/43 mm||r/m10.53-13.33||m0.38||s2.3-2.9||72,000||kg1,750||Type 58, T-34-1, T-34-2, WZ-131|
|VII||85 mm 62-85T||47||180/180/300 HP||145/250/43 mm||r/m10.53||m0.37||s2.3||75,000||kg1,650||WZ-131|
|VII||100 mm 44-100JT||34-45||250/250/330 HP||175/235/50 mm||r/m6.45-6.59||m0.42||s2.9||79,000||kg2,257||IS-2, T-34-1, T-34-2|
|VII||100 mm Type 59||34||250/250/330 HP||181/241/50 mm||r/m6.9||m0.39||s2.9||kg2,257||Type 59|
|VIII||85 mm 64-85T||47||200/200/320 HP||159/260/43 mm||r/m10.53-10.59||m0.36||s2.3||89,000||kg1,700||WZ-131, WZ-132|
|VIII||85 mm 64-85TG||47||200/200/320 HP||172/260/43 mm||r/m10.53-10.91||m0.34||s2.3||89,000||kg1,750||WZ-132|
|VIII||100 mm 59-100T||34-45||250/250/330 HP||181/241/50 mm||r/m6.45-7.89||m0.39||s2.7-2.9||102,000||kg2,257||WZ-131, WZ-132, T-34-2, WZ-120|
|VIII||122 mm 37-122JT||28-40||390/390/465 HP||175/300/61 mm||r/m4-4.62||m0.48||s3.4||120,000||kg2,440||IS-2, 110, T-34-2|
|VIII||122 mm D-25T||28-45||390/390/465 HP||175/300/61 mm||r/m4.8-5.31||m0.46||s2.9-3.4||135,000||kg2,590||IS-2, 110, WZ-111 model 1-4|
|VIII||122 mm D-25TA||40-45||390/390/465 HP||175/250/61 mm||r/m4.17-4.55||m0.46||s3.4||kg2,590||T-34-3, 112|
|IX||100 mm 60-100T||34-45||250/250/330 HP||189/244/50 mm||r/m7.06-8.33||m0.36||s2.3-2.5||180,000||kg2,257||WZ-132, WZ-120|
|IX||100 mm 62-100T||40-50||320/320/420 HP||215/265/50 mm||r/m6-7.32||m0.38||s2.3-2.9||221,000||kg2,257||WZ-120, 110, WZ-111 model 1-4|
|X||122 mm 60-122T||34-40||440/440/530 HP||257/400/68 mm||r/m5-5.5||m0.36-0.38||s2.7-3.4||300,000||kg2,757||WZ-120, 113|
|X||122 mm 60-122TG||40||440/440/530 HP||268/400/68 mm||r/m6.25||m0.35||s2.7||185,140||kg2,800||121|
|X||130 mm 59-130T||40||490/490/640 HP||244/340/65 mm||r/m4.29||m0.4||s2.9||330,000||kg3,090||WZ-111 model 1-4|