Prinz Eitel Friedrich

A side profile of what the Mackensen-class would have looked like.

History

Design

Following the Derfflinger-class, a class of battlecruisers was ordered that would maintain the protection and speed, while increasing the caliber of the main armament to either 340mm or 355mm in four twin turrets. Following long debates about whether or not battlecruisers were actually needed, and how these should be built with what kind of priorities, a design was proposed which left most parties satisfied. As the displacement should not get too large, yet the demand for larger guns remained, sacrifices in armor had to be made to allow a ship to fulfill the speed requirement.

The hull was 223.1m long overall and 30.9m wide, with a draft of up to 9.3m. Standard displacement was projected with 31,000 tons, while a fully loaded ship would displace 35,500 tons. Standard complement was slated to be 1,186 men, of which 46 would be officers.

One of the key features of the Mackensen-class was the increased caliber for the main artillery. As a result, the main armament consisted of eight 35.5cm guns mounted in four twin turrets, arranged in a manner similar to the preceding Derfflinger-class. Firing a 600kg shell, these guns were capable of maintaining a theoretical rate of fire of 2.5 rounds per minute per gun. The range of the gun varied depending on the mountings that were intended. While initial plans deemed a 16° elevation to be sufficient, war experiences demanded 20° elevations. These numbers were later raised to 28° for a maximum range of slightly above 28 kilometers. The secondary armament was planned as fourteen 150mm guns mounted in casemates below the deck. With a rate of fire between five and seven shots per minute and a maximum range of 13.5km, these guns would have fired 45.3km heavy AP or HE projectiles. Anti-aircraft armament consisted of eight single mounted 88mm guns, and five underwater-mounted torpedo launchers would theoretically allow these ships to torpedo their opponents.

The armor of the Mackensen-class greatly deviated from that of preceding capital ships. Unlike the Derfflinger-class, no turtleback was present, and instead the vertical protection consisted of a belt with 300mm thickness, which would thin out to 150mm for the upper belt and the lower edge. Behind that only a 50-60mm strong bulkhead would protect the machinery and magazines. Horizontal protection featured a 30mm deck over the vital areas, and a 25mm deck above. Protection of the main armament consisted of 250-290mm barbettes, while the turrets were armored with 320mm faces, a 180-190mm slope, 200-210mm strong sides and a 110mm roof. The conning tower had 300-350mm strong sides and was protected from above with a 100mm roof.

The machinery of the Mackensen-class consisted of sixteen boilers, of which four allowed the usage of both oil and coal, while the rest were purely coal-fired. They would produce the steam for four Parson-turbines for an overall rated 90,000 shp. Thisgave the Mackensen-class a theoretical top speed of 28kn. 3,940 tons of coal and 1,970 tons of oil would allow for a Cruising Range of around 8,000nm at 14kn.

In-game historical inaccuracies

• Actually a battlecruiser.
• Prinz Eitel Friedrich is depicted in a fictional Nazi refit that was invented by WG. Only Mackensen represents the more historical version.
• Prinz Eitel Friedrich was built for the Imperial German Navy. Its depiction as a Kriegsmarine warship is another fabrication by Wargaming.
• The Kriegsmarine was founded in 1935; Prinz Eitel Friedrich was broken up in 1921.
• In-game description falsely claims that Prinz Eitel Friedrich entered service in 1914; construction of the real ship began in 1915.

• 

  Line-drawing of the Mackensen class.

• 

  Unfinished battlecruiser Prinz Eitel Friedrich (left) and Bayern-class battleship Württemberg in Hamburg after the war, in about 1920.

See here for links to Update notes.

• Available for testing by supertesters in the game starting from Update 0.7.7.
• Introduced in Update 0.7.12.
  • Available in the Premium Shop or obtained by completing directives of the "In the Name of His Highness!" Temporary Campaign.
  • Added permanent "New Year" camouflage with the following bonuses:
    • –10% of the cost of post-battle ship maintenance.
    • +50% to experience per battle.
    • –3% to visibility from ships.
    • +4% to the dispersion of enemy shells fired at your ship.
• Update 0.8.11:
  • The main battery dispersion ellipse was adjusted to the value ​​of American and British battleships.
• Update 0.9.2:
  • Penetration of secondary battery 105 mm HE shells was increased from 18 to 26 mm.
• Update 0.10.0:
  • The firing range of the secondary battery was increased to 5.6 km.
• Update 0.10.7:
  • Minor updates to the armor model.