FCM 36 Pak 40
FCM 36 Pak 40
Mouse over "
[Client Values; Actual values in
850 Cost |
32064 HP Hit Points |
13.89/14.64.19/14.6 t Weight Limit |
- Commander (Radio Operator)
- Gunner
- Driver
- Loader
9191 hp Engine Power |
24/10 km/h Speed Limit |
3737 deg/s Traverse |
6.5521.72 hp/t Power/Wt Ratio |
YesYes Pivot |
// mm Hull Armor |
AP/APCR/HE
AP/APCR/HE Shells |
70/2800/38
70/2800/38 Shell Cost |
110/110/175110/110/175 HP Damage |
98/126/3898/126/38 mm Penetration |
r/m ▲
15.92 r/m Standard Gun ▲
15.92 Rate of Fire Standard Gun |
▲
Standard Gun
▼
Standard Gun
▲
1751.2 Standard Gun ▲
Standard Gun
▼
Standard Gun
▲
1751.2 Damage Per Minute Standard Gun |
m ▲
0.37 m With 50% Crew: 0.458 m ▲
0.37 Accuracy With 50% Crew: 0.458 m |
s 1.5 s 1.5 Aim time |
4444 deg/s Gun Traverse Speed |
14° Gun Arc |
-8°/+17°-8°/+17° Elevation Arc |
7070 rounds Ammo Capacity |
1515 % Chance of Fire |
m 400 m 400 View Range |
m 310 m 310 Signal Range |
III
850
The FCM 36 Pak 40 is a French tier 3 premium tank destroyer.
In 1943, ten FCM 36 tanks captured by the Germans were converted into tank destroyers. The vehicles fought in France with the Verstärkte Schnelle Brigade West.
With a thinly armored, open-top superstructure and weak engine, the FCM 36 Pak 40 has a hard time defending itself when caught in the open and needs to be thoroughly concealed. When at a safe distance however, the FCM's powerful 75mm cannon and extremely high 400m view range enable it to do a great amount of damage in very little time.
Modules / Available Equipment and Consumables
Modules
Tier | Gun | Penetration (mm) |
Damage (HP) |
Rate of fire (rounds/minute) |
Dispersion (m/100m) |
Aiming time (s) |
Weight (kg) |
Price ()
| |
---|---|---|---|---|---|---|---|---|---|
IV | 7,5 cm Pak 40/2 | 98/126/38 | 110/110/175 | 15.92 | 0.37 | 1.5 | 1520 | 28900 |
Tier | Engine | Engine Power (hp) |
Chance of Fire on Impact (%) |
Weight (kg) |
Price ()
| |
---|---|---|---|---|---|---|
I | Berliet MDP | 91 | 15 | 200 | 1500 |
Tier | Suspension | Load Limit (т) |
Traverse Speed (gr/sec) |
Rmin | Weight (kg) |
Price ()
| |
---|---|---|---|---|---|---|---|
III | FCM 36 Pak 40 | 14.6 | 37 | 0 | 2000 | 240 |
Compatible Equipment
Compatible Consumables
Player Opinion
Pros and Cons
Pros:
- Excellent view range
- Powerful gun with shot reload time
- Good accuracy, aim time, and gun depression
Cons:
- Very poor acceleration and top speed
- Thin superstructure armor
- Narrow gun arc
- Poor signal range
- Low ammo capacity
Performance
The FCM 36 Pak 40, armed with its namesake Pak 40 gun, is a textbook sniper. The 75mm gun has enough penetration to damage even tier V heavy tanks and also has very good alpha damage for a tier III gun. The gun's relatively short reload time of roughly 3.6 seconds means that the FCM also has a higher DPM than most tier III tank destroyers. Its 400m view range enables it to stay invisible by positioning itself far outside the view range of most enemy tanks, even those two tiers higher than the FCM. When left alone in a good vantage point, an FCM is capable of doing devastating amounts of damage in a short amount of time.
Though it may be a highly efficient sniper, the FCM almost completely dependent upon distance, concealment, and allied support to keep it safe. With a 91hp engine, the FCM is extremely slow moving and can't relocate quickly. The FCM can't count on its armor to defend it either (the armor ratings given in-game are for the FCM's lower hull, and don't apply to the very large and much more poorly armored superstructure on top of the tank). FCM drivers need also be cautious of being spotted even beyond the range of enemy tank guns, as it is a prime target for artillery.
Compared to Similar Tanks
Armed with the same 75mm Pak 40 cannon as the Marder II, the FCM is often compared to it. Despite the fact that two tanks share the same gun, the Marder's gun, oddly, has better penetration values. The Marder also has a much wider traverse range, but gets this at a great cost to its accuracy and aim time. Thus, the FCM is far better at aiming and hitting long-range shots. Though both tanks are poorly armored and slow, the Marder is still much more powerful and has twice as much horsepower per ton when compared to the FCM.
Early Research
All modules are researched with the tank.
Suggested Equipment
Gallery
Historical Info