Sexton I
Revision as of 14:21, 1 August 2013 History added | Revision as of 14:21, 1 August 2013 History added | |||
Line 23: | Line 23: | |||
|Gallery= | |Gallery= | |||
|History=The 25pdr SP, tracked, Sexton was a self-propelled artillery vehicle of World War II, based on an American tank hull design, built by Canada for the British Army, and associated Commonwealth forces, and some of the other Allies. It was developed to give the British Army a mobile artillery gun using their Ordnance QF 25 ponder gun-howitzer. From 1943 it replaced the US built M7 Priest (US 105 mm guns on a M3 Lee tank chassis); these had replaced the British Bishop (25 pdr on Valentine tank chassis) which had been improvised in 1942. | |History=The 25pdr SP, tracked, Sexton was a self-propelled artillery vehicle of World War II, based on an American tank hull design, built by Canada for the British Army, and associated Commonwealth forces, and some of the other Allies. It was developed to give the British Army a mobile artillery gun using their Ordnance QF 25 ponder gun-howitzer. From 1943 it replaced the US built M7 Priest (US 105 mm guns on a M3 Lee tank chassis); these had replaced the British Bishop (25 pdr on Valentine tank chassis) which had been improvised in 1942. | |||
+ | ||||
==Development history== | ==Development history== | |||
+ | ||||
In 1942, the US supplied enough M7 Priest self-propelled howitzers to equip a number of British Army artillery units in fighting in North Africa. The British found the Priest to be an excellent weapon, which gave artillery the same mobility as tank units. However, the Priest used the American 105 mm howitzer rather than the British equivalent, the QF 25 ponder gun-howitzer. Having to supply different ammunition for a few units complicated supply for the British Army. The US attempted to fit a 25 ponder to the M7 Priest - producing the T51 in mid 1942 - but the program suffered delays including the destruction of the gun mount on the prototype during the first live-firing exercises. US resources were not available for a vehicle solely for British use so Britain turned to Canada. The Canadian Army Engineering Design Branch through the Canadian government's Department of Munitions and Supply were asked to build a vehicle similar to the M7 on the Ram tank chassis. The Ram tank was a Canadian tank design that used the chassis of the American Medium Tank M3 as did the Priest. The Ram had been sidelined by a decision to standardize on the Sherman tank for British and Canadian units. A prototype was completed on 23 June 1942. Following trials in Canada, the Canadian government ordered 124 vehicles in three batches. The prototype was shipped to the United Kingdom in early 1943, where it underwent further trials; the vehicle was found to be highly satisfactory and was given the designation "Sexton" (after the religious custodian) in May 1943. The British government ordered 300 Sextons in the summer of 1943; however, these Sextons were to be built on Grizzly tank hulls (Canadian-built M4A1 Sherman tanks) instead of Ram tank hulls. The Ram-based Sexton was designated as the Sexton Mark I and the Grizzly-based Sexton was designated the Sexton Mark II. British orders for the Sexton II eventually totaled 2,026 vehicles. | In 1942, the US supplied enough M7 Priest self-propelled howitzers to equip a number of British Army artillery units in fighting in North Africa. The British found the Priest to be an excellent weapon, which gave artillery the same mobility as tank units. However, the Priest used the American 105 mm howitzer rather than the British equivalent, the QF 25 ponder gun-howitzer. Having to supply different ammunition for a few units complicated supply for the British Army. The US attempted to fit a 25 ponder to the M7 Priest - producing the T51 in mid 1942 - but the program suffered delays including the destruction of the gun mount on the prototype during the first live-firing exercises. US resources were not available for a vehicle solely for British use so Britain turned to Canada. The Canadian Army Engineering Design Branch through the Canadian government's Department of Munitions and Supply were asked to build a vehicle similar to the M7 on the Ram tank chassis. The Ram tank was a Canadian tank design that used the chassis of the American Medium Tank M3 as did the Priest. The Ram had been sidelined by a decision to standardize on the Sherman tank for British and Canadian units. A prototype was completed on 23 June 1942. Following trials in Canada, the Canadian government ordered 124 vehicles in three batches. The prototype was shipped to the United Kingdom in early 1943, where it underwent further trials; the vehicle was found to be highly satisfactory and was given the designation "Sexton" (after the religious custodian) in May 1943. The British government ordered 300 Sextons in the summer of 1943; however, these Sextons were to be built on Grizzly tank hulls (Canadian-built M4A1 Sherman tanks) instead of Ram tank hulls. The Ram-based Sexton was designated as the Sexton Mark I and the Grizzly-based Sexton was designated the Sexton Mark II. British orders for the Sexton II eventually totaled 2,026 vehicles. | |||
Revision as of 14:21, 1 August 2013
This article requires additional modification. The design and/or content of this article do not conform to wiki standards.
|
Sexton I
Mouse over "
[Client Values; Actual values in
1,250 Cost |
25050 HP Hit Points |
25.86/3112.37/31 t Weight Limit |
- Commander
- Gunner
- Driver
- Radio Operator
- Loader
- Loader
390390 hp Engine Power |
40.2/10 km/h Speed Limit |
2424 deg/s Traverse |
15.0831.53 hp/t Power/Wt Ratio |
YesYes Pivot |
// mm Hull Armor |
HE
HE Shells |
83/2800/0
83/2800/0 Shell Cost |
280/180/180280/180/180 HP Damage |
44/92/7144/92/71 mm Penetration |
r/m ▲
5.56 r/m Standard Gun ▲
5.56 Rate of Fire Standard Gun |
▲
Standard Gun ▼
Standard Gun
▲
1556.8 Standard Gun
▲
Standard Gun ▼
Standard Gun
▲
1556.8 Damage Per Minute Standard Gun
|
m ▲
0.76 m With 50% Crew: 0.941 m ▲
0.76 Accuracy With 50% Crew: 0.941 m |
s 5.5 s 5.5 Aim time |
1616 deg/s Gun Traverse Speed |
40° Gun Arc |
-9°/+40°-9°/+40° Elevation Arc |
195195 rounds Ammo Capacity |
2020 % Chance of Fire |
m 330 m 330 View Range |
m 570 m 570 Signal Range |
III
1250
The Sexton I is a British tier 3 premium self-propelled gun.
In 1943, Montreal Locomotive Works started mass production of the Sexton SPG developed on the basis of the RAM II. The vehicle was similar to the M7 Priest but featured a British 25 pounder. A total of 2,150 vehicles were produced by 1945; the first 125 vehicles were designated "Sexton I".
Modules / Available Equipment and Consumables
Modules
Tier | Gun | Penetration (mm) |
Damage (HP) |
Rate of fire (rounds/minute) |
Dispersion (m/100m) |
Aiming time (s) |
Weight (kg) |
Price ()
| |
---|---|---|---|---|---|---|---|---|---|
IV | Q.F. 25-Pr. Gun/How. Mk. II | 44/92/71 | 280/180/180 | 5.56 | 0.76 | 5.5 | 510 | 22850 |
Tier | Engine | Engine Power (hp) |
Chance of Fire on Impact (%) |
Weight (kg) |
Price ()
| |
---|---|---|---|---|---|---|
V | Wright (Continental) R975 EC2 | 390 | 20 | 516 | 13900 |
Tier | Suspension | Load Limit (т) |
Traverse Speed (gr/sec) |
Rmin | Weight (kg) |
Price ()
| |
---|---|---|---|---|---|---|---|
III | Sexton I | 31 | 24 | 0 | 11000 | 1180 |
Compatible Equipment
Compatible Consumables
Player Opinion
Pros and Cons
Pros:
- High rate of fire
- Fairly mobile
- Massive ammo capacity
- Large gun sweep
Cons:
- Low damage per shot
- Poor shell penetration
Gallery
Historical Info
Development history
In 1942, the US supplied enough M7 Priest self-propelled howitzers to equip a number of British Army artillery units in fighting in North Africa. The British found the Priest to be an excellent weapon, which gave artillery the same mobility as tank units. However, the Priest used the American 105 mm howitzer rather than the British equivalent, the QF 25 ponder gun-howitzer. Having to supply different ammunition for a few units complicated supply for the British Army. The US attempted to fit a 25 ponder to the M7 Priest - producing the T51 in mid 1942 - but the program suffered delays including the destruction of the gun mount on the prototype during the first live-firing exercises. US resources were not available for a vehicle solely for British use so Britain turned to Canada. The Canadian Army Engineering Design Branch through the Canadian government's Department of Munitions and Supply were asked to build a vehicle similar to the M7 on the Ram tank chassis. The Ram tank was a Canadian tank design that used the chassis of the American Medium Tank M3 as did the Priest. The Ram had been sidelined by a decision to standardize on the Sherman tank for British and Canadian units. A prototype was completed on 23 June 1942. Following trials in Canada, the Canadian government ordered 124 vehicles in three batches. The prototype was shipped to the United Kingdom in early 1943, where it underwent further trials; the vehicle was found to be highly satisfactory and was given the designation "Sexton" (after the religious custodian) in May 1943. The British government ordered 300 Sextons in the summer of 1943; however, these Sextons were to be built on Grizzly tank hulls (Canadian-built M4A1 Sherman tanks) instead of Ram tank hulls. The Ram-based Sexton was designated as the Sexton Mark I and the Grizzly-based Sexton was designated the Sexton Mark II. British orders for the Sexton II eventually totaled 2,026 vehicles.
Unlike the Ram, which was inferior operationally to the Sherman and never saw combat as a gun tank, the Sexton was successful. Between 1943 and 1945, the Montreal Locomotive Works manufactured a total of 2,150 Sextons for the use of both Canadian and British forces. The vehicle entered service in September 1943. The vehicles were first used in combat in Italy by the British Eighth Army. Later Sextons took part in the invasion of France and subsequent Battle of Normandy and the campaign in north-western Europe. During the D-day landings a number of Sextons were ordered to fire from their landing craft as they approached the beaches although the fire did not prove to be very accurate. In spite of its confused origins, the Sexton was a combination of proven parts and proved to be a successful design and remained in British service until 1956. In oppose to Germany, which often used its self-propelled guns (assault guns) in a front line direct fire role, Britain and Canada only used the Sexton for indirect supporting fire. They kept the Sextons well back from the front line and used forward observers to direct overwhelming fire on a target.
USA | IIT1 HMC • IIIT18 HMC • IIIM7 Priest • IVT82 HMC • IVM37 • VM41 HMC • VIM44 • VIIM12 • VIIIM40/M43 • IXM53/M55 • XT92 HMC |
UK | IILoyd Gun Carriage • IIISexton II • IIISexton I • IVBirch Gun • VBishop • VIFV304 • VIICrusader 5.5-in. SP • VIIIFV207 • IXFV3805 • XConqueror Gun Carriage |
Germany | IIG.Pz. Mk. VI (e) • IIISturmpanzer I Bison • IIIWespe • IVPz.Sfl. IVb • IVSturmpanzer II • VGrille • VIHummel • VIIG.W. Panther • VIIIG.W. Tiger (P) • IXG.W. Tiger • XG.W. E 100 |
France | IIRenault FT 75 BS • IIILorraine 39L AM • IVAMX 105 AM mle. 47 • VAMX 13 105 AM mle. 50 • V105 leFH18B2 • VIAMX 13 F3 AM • VIILorraine 155 mle. 50 • VIIILorraine 155 mle. 51 • IXBat.-Châtillon 155 55 • XBat.-Châtillon 155 58 |
USSR | IISU-18 • IIISU-26 • IVSU-5 • VSU-122A • VISU-8 • VIIS-51 • VIISU-14-1 • VIIISU-14-2 • IX212A • XObject 261 |
China | |
Japan | |
Czechoslovakia | |
Sweden | |
Italy | |
Poland |