Wargaming.net 위키에 오신 것을 환영합니다!


이동: 둘러보기, 검색

M6 (Stock)

885000 가격
980 HP내구도
57.41 / 61 중량
  1. 지휘관
  2. 포수
  3. 포수
  4. 조종수
  5. 무전수
  6. 장전수
102/44/41차체 장갑(정면/측면/후면, mm)
102/83/83포탑 장갑(정면/측면/후면, mm)
825 마력엔진 출력
35 km/h최고/후진 속력
21 도/초회전 속도
160 damage
101 mm평균 관통력
7.92905848833115 클립 재장전 시간
25 도/초주포 회전 속도
230 m관측 범위
500 m통신 범위

Coming out of the T1 Heavy Tank, you should feel right at home with the M6, as they look and play very similarly. It starts off with 3 rather underpowered 76mm cannons that can make short work of medium and light tanks of its tier but are inadequate for penetrating and damaging other heavy tanks and tank destroyers. The 90mm gun, however, is an excellent gun and is much more suited for the the M6. The M6 has good engine power and speed for a heavy of its tier, which helps to make up for its lack of armor, even frontally, which isn't adequate for bouncing most shots. Its side armor is even worse, and is easy to hit with the tank's large size. This makes the M6 almost always limited to the second line, where it can pick off enemies and take cover behind larger tanks and terrain with its decent mobility. In all, the M6 is very similar to the T1 Heavy in both size and gameplay.



단계 포탑 포탑 장갑 (정면/측면/후면, mm) 주포 회전 속도 (도/초) 관측 범위 (m) 일반 경험치 중량 (톤)
V M6D1 102/83/83 25 230 0 8000
단계 주포 평균 관통력 (mm) 연사력 100m에서의 분산도 조준 시간 일반 경험치 중량 (톤)
V 3-inch Gun M7 101/157/20 160/160/200 7.57 0.46 2.3 0 1450
VI 76 mm Gun M1A1 128/177/20 160/160/200 9.58 0.43 2.3 5430 1567
VI 76 mm Gun M1A2 128/177/20 160/160/200 9.58 0.4 2.3 6840 1590
단계 포탑 포탑 장갑 (정면/측면/후면, mm) 주포 회전 속도 (도/초) 관측 범위 (m) 일반 경험치 중량 (톤)
VI M6D2 102/83/83 28 240 6350 8400
단계 주포 평균 관통력 (mm) 연사력 100m에서의 분산도 조준 시간 일반 경험치 중량 (톤)
V 3-inch Gun M7 101/157/20 160/160/200 7.57 0.46 2.3 0 1450
VI 76 mm Gun M1A1 128/177/20 160/160/200 9.58 0.43 2.3 5430 1567
VI 76 mm Gun M1A2 128/177/20 160/160/200 9.58 0.4 2.3 6840 1590
VII 90 mm Gun M3 160/243/45 225/225/270 6.91 0.38 2.3 16520 2050


단계 엔진 엔진 출력 (마력) 충돌 시 화재 발생 확률 일반 경험치 중량 (톤)
VI Wright G2X M781C9GC1 825 20 0 612
VII Wright G200 M781C9GC1 960 20 17820 612

단계 현가장치 한계 중량 회전 속도 (도/초) 일반 경험치 중량 (톤)
V HVS1 61 21 0 15000
VI HVS2 61 25 5960 15000


단계 무전기 통신 범위 (m) 일반 경험치 중량 (톤)
VI SCR_508_US 500 0 100

Compatible Equipment

대형 파편 방지대
탄산가스 충전 연료탱크
코팅 광학장비
개량형 주포 구동 장치
개량형 수직 코일 스프링 3급
개량형 환기장치 3급
전차용 중구경 장전기
공구 상자
"습식" 탄약 적재함 1종

Compatible Consumables

Player Opinion

Pros and Cons


  • Good speed and maneuverability
  • Excellent (for tier) 90mm gun
  • Fast aim
  • Quick rate of fire on the 76 mm Gun M1A1 and 76 mm Gun M1A2
  • Great gun elevation and depression


  • Weak side armor
  • Large silhouette
  • Terrible reverse speed
  • Exposed sponsons
  • Frontal armor is not enough, even on turret. Most tier 5 medium can penetrate it even when angled


While it effectively starts out as a slower T1 HT, it is able to equip an upgraded 76mm gun, the M1A2, and later the 90mm M3. Upgrading the engine will bring it on par with an upgraded T1's speed. The M6 does have the best horsepower-to-weight ratio of any heavy tank in its tier, and you can use the quick acceleration to quickly retreat from a risky firefight with more powerful tanks. It is a good rammer, since many vehicles even at Tier VIII are lighter. However, do not expect KV-5 ramming power, especially at higher levels or against at-tier heavy tanks.

Like the T1, the M6 has two gunners, this allows you to take more gunner-related skills and perks if you decide to keep the tank and train your crew up. Many strategies that work with the T1 Heavy Tank carry over to the M6.

It is important to force the enemy tanks to face you, since enemy tanks will have no problem hitting your large side silhouette and penetrating your thin side armor. Angling your tank to the enemy, no more than 20 degrees, will allow you to automatically bounce many large-caliber shots, even the notorious D-2-5T gun found on the KV-1S. Your frontal armor should be able to bounce high-penetration 76mm shot rather easily. However, large-caliber guns on at-tier heavy tanks and some Tier V tank destroyers will still be able to penetrate your front.

Overall, the performance and the subsequent role of the M6 in battle is largely dependent on which battle tier you land in. If you're at the top, you can largely rely on the M6's fairly strong frontal armor to try and lead a push.

If however you find yourself in the middle or at the bottom of the list, the M6 should be used in a secondary supporting role. On the bottom of the list, most tanks can penetrate your front armor, and do even worse damage if they manage to flank you, or catch you from behind. But if you're equipped with the 90mm cannon, you may be able to lend your fire support and damage tier 8's. Gold shells can easily destroy opponents that standard shells could not.

Early Research

  • The SCR 538 radio, the Wright G200 Engine, and the 76 mm Gun M1A1 gun carry over from the T1 HT, so those should be equipped immediately upon purchasing this tank.
  • Start out by researching either the suspension or the M1A2 gun.
  • Then research the other followed by the 90mm M3 which is required for the T29 otherwise the 76 will cause the T29 to be a liability to the team.

Historical Info

The Heavy Tank M6 was an American heavy tank designed during World War II. The tank was produced in small numbers and never saw combat.

Because of limited budgets for tank development in the interwar years, at the outbreak of World War II, the US Army possessed few tanks, though it had been keeping track of armor use in Europe and Asia. Successful employment of armored units in 1939 - 1940, mostly by the Germans, gave momentum to a number of US tank programs, including a heavy tank program. The United States possessed a massive industrial infrastructure and large numbers of engineers that would allow for mass production of tanks.

Following the Chief of Infantry's recommendation from 20 May 1940, the US Army Ordnance Corps started to work on a 50-ton heavy tank. Initially, a multi-turreted design was proposed, with two main turrets armed with low-velocity T6 75mm (2.95") guns, one secondary turret with a 37 mm gun, a coaxial .30 caliber (7.62mm) machinegun, another secondary turret with a 20 mm gun, and a coaxial .30 caliber machine gun. Four .30 caliber machine guns were to be installed in ball mounts, two in the glacis plate and two in the rear corners of the hull. The project was approved on 11 June 1940, and the vehicle received the designation Heavy Tank T1. The design was somewhat similar in concept to multi-turreted breakthrough tanks developed in Europe in the 1920s and throughout the 1930s, such as the British Vickers A1E1 Independent or the Soviet T-35. Disadvantages of these "land dreadnoughts", namely their excessive size, difficulty in coordinating actions of the crew, and high production costs, led to abandonment of the concept in Europe.

By October, the US developers reached the same conclusion as their European counterparts. The armament was changed to a single vertically-stabilized 3 inch (76.2 mm) gun and a coaxial 37 mm gun in a single three-man turret with both manual and electric traverse. The turret had a commander's cupola identical to that of the M3 Medium Tank. Additional armament consisted of two .50 caliber machine guns in a bow mount (operated by the assistant driver), two .30 caliber MGs in the front plate (fired electrically by the driver), one .30 caliber in the commander's cupola, and one .50 caliber in a rotor mount in the right rear of the turret roof (operated by the loader). The crew consisted of a commander (turret left), gunner (turret right), loader (turret), driver (hull left front), assistant driver (hull right front), and ammunition passer (hull). One of the main challenges was developing a powerpack for such a heavy vehicle. The Wright G-200 air-cooled radial gasoline engine was selected by a committee formed by the Society of Automotive Engineers, but no suitable transmission was available. The committee recommended developing a hydramatic transmission, while the possibility of using a torque converter or an electric transmission was also to be checked.

In 1941-1942, three prototypes were built by the Baldwin Locomotive Works, one with an electric transmission and two with torque converter transmissions. Variants with hydramatic transmission were never completed. The prototypes also differed in hull assembly method; one had a welded hull and the other two cast hulls. On 26 May 1942, two variants with torque converter transmissions were standardized as the M6 and M6A1. Standardization of the electric transmission equipped T1E1 as M6A2 was never approved, but manufacturing of the vehicle was nevertheless recommended. It was proposed by the Ordnance Corps that 115 T1E1s would be built for the US Army and 115 M6s and M6A1s for US allies. The production started in December 1942. Some minor changes were introduced in the production vehicles: the cupola was replaced by a double-door hatch with a ring mount, and the machine gun in a rotor mount and the left front machine gun were also removed.

However, by the time the M6 was ready for production, the Armored Corps had lost interest in the project. The advantages the M6 offered over medium tanks - it's much thicker armor and slightly more powerful gun, were offset partly by the shortcomings of the design; a very high silhouette, awkward internal layout, reliability problems, and partly by logistical concerns. By the end of 1942, the Armored Corps were sure that the new M4 Sherman gave adequate solutions for the present and near future, while being reliable, cheap, and much easier to transport.

Work on M6 didn't stop at once. The T1E1 prototype was tested with a T7 90 mm gun and was found to be a satisfactory gun platform, although poor turret layout was again noted. In August 1944, the Ordnance Corps recommended using the T1E1s produced to build 15 77-ton vehicles designated M6A2E1, with thicker (up to 7.5 inch vertical protection) glacis armor and a turret developed for the T29 Heavy Tank and armed with a T5E1 105 mm gun. The proposal was rejected by General Eisenhower. However, by late 1942, main development efforts shifted to other projects, one of which eventually resulted in the M26 Pershing.

On 14 December 1944, the M6 was declared obsolete. Only forty units were produced and they never left US soil. Several toured the United States for propaganda purposes, where they gave performance displays (such as car crushing) at War Bond drives and the like. All were eventually scrapped, except for a single T1E1 on display at the United States Army Ordnance Museum, Aberdeen, Maryland.

American Heavy tank comparision
Mk.VII M6 T28 T29 T30 T32 T34 M103A2
Crew 8 6 4 6 6 5 6 5
Length 10,43m 8,43m 11,12m 11,56m 10,9m 10,83m 11,77m 11,23m
Width 3,66m 3,12m 4,54m 3,8m 3,8m 3,76m 3,8m 3,63m
Height 3,12m 3,00m 2,86m 3,22m 3,22m 2,81m 3,22m 3,56m
Weight 39,5t 57,4t 86,3t 64,25t 64,74t 54,5t 65,2t 58,1t
Max. speed 8,8km/h 35km/h 12,8km/h 35km/h 35km/h 35km/h 35km/h 37km/h
hull armour
305mm 102mm
side armour 12mm 70mm 152mm 76mm 76mm 76mm 76mm 51mm
Turret armour
16mm 83mm
- 178mm
top armour 6-10mm 25mm 38mm 38mm 38mm 38mm 38mm 38mm
bottom armour 6-8mm 25mm 25mm 25mm 25mm 25mm 25mm 38mm
Gun 2x57mm
75mm M7
37mm MB


  • T1 - Cast hull, hydramatic transmission. Never built.
  • T1E1 - Cast hull, electric transmission. Often unofficially referred to as M6A2. 20 units built.
  • T1E2 / M6 - Cast hull, torque converter transmission. 8 units built.
  • T1E3 / M6A1 - Welded hull, torque converter transmission. 12 units built.
  • T1E4 - Welded hull, hydramatic transmission. Never built.
  • M6A2E1 - Uparmored T1E1 with a new turret armed with a T5E1 105 mm gun. Never built.

Historical Gallery

Sources and External Links

Light Tanks
Medium Tanks
Heavy Tanks
Tank Destroyers
Self-Propelled Artillery