T1 Heavy Tank
T1_hvy (Stock)
| 435000 Fiyat |
| 730 CPDayanıklılık |
| 57.5 / 61.5 Ağırlık |
- Komutan
- Nişancı
- Nişancı
- Sürücü
- Telsiz Operatörü
- Doldurucu
| 83/44/41Gövde Zırhı(ön/yanlar/arka, mm) |
| 102/83/83Kule Zırhı(ön/yanlar/arka, mm) |
| 700 b.g.Motor Gücü |
| 35.4 km/sAzami Hız / Geri Hız |
| 20Dönüş Hızı(derece/saniye) |
| 160 damage |
| 101 mmOrtalama Deliş |
| 8.68546272618393 Tam Yükleme Süresi |
| 31Top Dönüş Hızı(derece/sn.) |
| 230 mGörüş Mesafesi |
| 500 mSinyal Menzili |
Compared to its Soviet counterpart, the KV-1, most players do not consider the T1 a powerful heavy tank for its tier. Although it lacks the KV-1's extended armament options, the upgraded M1A1 cannon sports great penetration and rate of fire, taking the T1 Heavy's firepower up to par with the KV-1's 85mm. In addition, the T1 has a very powerful engine available as an upgrade, making the T1 a more mobile tank than its Soviet and British counterparts. It has good frontal armor and very thick turret armor. However, its long sides are very thinly protected, so keep your flanks hidden and expose only your front armor and turret to minimize incoming damage. Keep in mind that the T1 is best played as a medium tank with the speed of a heavy tank, and not as a real heavy like the KV-1. Alternatively, you can hold chokepoints and use your fast firing cannon to deter others from attacking.
Do be aware that the T1 Heavy Tank requires more skill to play than the KV-1. That said, in the hands of a good player adept at both medium tank and Hulldown (American Heavy) tactics, they will find this vehicle to be a very good tank. With the combination of good armor, good maneuverability, high DPM and high weight this tank will prove superior to tanks at its own tier and will prove a match to even higher tiered opponents.
Kule
| Seviye | Kule | Kule Zırhı (ön/yanlar/arka, mm) | Top Dönüş Hızı (derece/sn.) | Görüş Mesafesi (m) | Deneyim | Ağırlık (t) |
|---|---|---|---|---|---|---|
| IV | T1D5 | 102/83/83 | 31 | 230 | 0 | 7020 |
| Seviye | Top | Ortalama Deliş (mm) | Atış Hızı | 100 m'de Dağılma | Nişan Alma Süresi | Deneyim | Ağırlık (t) | |
|---|---|---|---|---|---|---|---|---|
| V | 3-inch Gun M7 | 101/157/20 | 160/160/200 | 6.91 | 0.46 | 2.3 | 0 | 1450 |
| Seviye | Kule | Kule Zırhı (ön/yanlar/arka, mm) | Top Dönüş Hızı (derece/sn.) | Görüş Mesafesi (m) | Deneyim | Ağırlık (t) |
|---|---|---|---|---|---|---|
| V | T1D6 | 102/83/83 | 30 | 230 | 2650 | 8020 |
| Seviye | Top | Ortalama Deliş (mm) | Atış Hızı | 100 m'de Dağılma | Nişan Alma Süresi | Deneyim | Ağırlık (t) | |
|---|---|---|---|---|---|---|---|---|
| V | 3-inch Gun M7 | 101/157/20 | 160/160/200 | 6.91 | 0.46 | 2.3 | 0 | 1450 |
| VI | 76 mm Gun M1A1 | 128/177/20 | 160/160/200 | 8.77 | 0.43 | 2.3 | 5430 | 1567 |
Motor
| Seviye | Motor | Motor Gücü (b.g.) | Darbe Aldığında Yangın Çıkma Olasılığı | Deneyim | Ağırlık (t) |
|---|---|---|---|---|---|
| V | Wright G200 M795C9GC1 | 700 | 20 | 0 | 612 |
| VI | Wright G2X M781C9GC1 | 825 | 20 | 5300 | 612 |
| VII | Wright G200 M781C9GC1 | 960 | 20 | 17820 | 612 |
| Seviye | Süspansiyon | Yükleme Sınırı | Dönüş Hızı (derece/saniye) | Deneyim | Ağırlık (t) |
|---|---|---|---|---|---|
| IV | HVSS T31 | 61.5 | 20 | 0 | 10600 |
| V | HVSS T35 | 61.5 | 25 | 2450 | 10600 |
Telsiz
| Seviye | Telsiz | Sinyal Menzili (m) | Deneyim | Ağırlık (t) |
|---|---|---|---|---|
| VI | SCR_508_US | 500 | 0 | 100 |
Compatible Equipment
Compatible Consumables
Player Opinion
Pros and Cons
Pros:
- Has the best overall mobility of all non-premium tier 5 heavies (with the top engine)
- Good rate of fire combined with decent penetration
- Frontal armor is quite reliable when top tier
- Decent speed, high weight, and frontal armor for its tier make it one of the best ramming tanks in the game
- Seems to have a very generous MM, often finding itself tier top
Cons:
- Weak side and rear armor
- Accuracy is lacking
- Large silhouette
- Painfully sluggish when stock
- Low alpha on the gun compared to other tier 5 heavies is a serious problem in tier 7 matches
Performance
Armed with the same 76mm gun as the M4 Sherman, this tank does not give the typical impression of a heavy tank. Its much stronger front and turret armor improves its survivability over the M4 considerably. Keeping the front facing your target is crucial, as the side armor is nearly identical to the M4's and presents a much larger silhouette. Also, be aware that the 105mm howitzer, commonly mounted by tanks at this level, will penetrate you on the side and rear for full damage using HE shells—more incentive to show the front. This tank shines when it's in the top tier. Otherwise, it usually moves into a supporting role, making use of its speed to fire while ducking in and out of cover. This tank is very poor without its top engine, since it relies on maneuverability to stay alive. It's never speedy but can maneuver well. It's heavier and faster than most other tier 5 tanks so it gives you the option to ram if necessary. Also, unlike most tanks, the T1 has two Gunners. This allows you to take more Gunner-specific skills and perks if you decide to keep the tank and train your crew up.
A good player familiar to medium tank tactics will find this to be an amazing tank—having a reasonable powerful gun (that unfortunately has sub-par accuracy) and being a fairly fast tank (utilizing its huge top engine) that has powerful armor for its tier, only bested by the KV-1. Additionally, the turret armor is thicker than the KV-1's stock turret, so keep this in mind. Top tier, this tank will easily and frequently get Steel Walls and High Calibers, and when played correctly, Top Gun and Sniper are common achievements.
Alternatively, with its relatively high speed and armor the T1 makes an excellent choice for ramming, especially with the large spall liner upgrade.
Early Research
- Unfortunately there are no modules that carry over from the M3 Lee.
- Stock, the suspension's weight capacity is maxed out, so you have to upgrade the suspension first.
- Next you may want to unlock the first engine, or else focus on the next step.
- Unlock the turret and then the gun so you can equip the much improved 76 mm M1A1.
- Finish up with the SCR 538 radio and the second engine, both of which are used on the M6.
Historical Info
The initial concept described in OCM 15842 was a multi-turreted vehicle. Two primary turrets, each armed with a low velocity T6 75mm gun, were to be equipped with power traverse to cover approximately 250 degrees. Two secondary turrets, also equipped with power traverse, were intended to cover a full 360 degrees. One secondary turret was to be armed with a 37mm gun and a .30 caliber machine gun in a combination mount while the other was to be fitted with a 20mm gun and a .30 caliber machine gun, also in a combination mount. In addition, the tank was to carry four .30 caliber machine guns in ball mounts. Two of these were to be located in diagonal plates at the rear corners of the hull and the remaining two were to be fitted in the slightly sloping front plate. The latter were to have electric firing mechanisms to permit their use by the driver as fixed sponson guns.
History
The project was approved on 11 July 1940 and the proposed vehicle was designated as the heavy tank T1. However, the military characteristics soon were revised and a full scale wooden mock-up was constructed incorporating the changes. The multiple turrets were eliminated and the main armament was mounted in a single large turret with a 69 inch diameter ring. The new arrangement was outlined in OCM 16200, dated 24 October 1940, and the changes were approved on 22 November. The new single turret was armed with a modified version of the 3 inch T9 antiaircraft gun in a combination mount with a 37mm gun V15E1. The turret was traversed 360 degrees either manually or by the electric system developed by Westinghouse. At this time, power elevation also was specified for the combination mount with a gyro- stabilizer. Later, the power elevation feature was dropped, but the elevation stabilizer was retained. The turret crew arrangement differed from that in later medium and heavy tanks with the tank commander located on the left side of the 3 inch gun. A.30 caliber machine gun in a cupola identical to that on the medium tank M3 was provided for the tank commander. The gunner's station in the right front of the turret was equipped with a periscopic sight and a direct sight telescope. A .50 caliber machine gun in a rotor mount was located in the right rear of the turret roof. Operated by the loader, its elevation ranged from -5 to + 60 degrees for use against both air and ground targets. A pistol port with a protect scope was installed in the rear wall of the turret.
Crew
At the time that OCM 16200 was published, a crew of six or seven men was proposed for the new heavy tank. Later, this was specified as six, when the tank was standardized. They consisted of the commander, gunner, loader, ammunition passer, driver, and assistant driver. The latter three rode in the hull with the driver in the left front. Two .30 caliber machine guns were mounted in the front armor, one on each side of the hull. Fixed in traverse, these weapons had an elevation range of 15 degrees and were fired electrically by the driver. A door in the front plate could be opened to give the driver a wide field of view and a smaller direct vision port was located just below the door. A protect scope in the driver's door provided vision when the tank was under fire. Two .50 caliber machine guns in a flexible mount were installed in the right front hull for use by the assistant driver (bow gunner). These guns could be traversed 15 degrees to the left or right of center and elevated from -10 to +60 degrees. In the original design, the two .50 caliber machine guns were installed in the mount, one above the other with the top gun to the left of the lower weapon. Metal sights or rods were attached to the guns to permit aiming through the coupled indirect sighting device. Two escape hatches were provided, one in each top front corner of the hull. An additional escape hatch was located in the hull floor. Two pistol ports with protector scopes were installed with one in the front side wall of each sponson.
Engine & Transmission
Early in the program, the SAE subcommittee on transmissions considered several proposals. These included torque converters designed by the Schneider Hydraulic Corporation, the Twin Disc Clutch Company, and Borg Warner Corporation as well as a new Hydromantic transmission proposed by the Olds Mobile Division of General Motors. Designs for gas- electric drives also were submitted by the Electromotive Division of General Motors and the General Electric Company. However, the gas-electric drive was considered too heavy and it was estimated at that time to weigh about five tons more than the other systems. A conventional synchromesh transmission also was discussed, but it was not considered feasible in such a heavy tank and it would require the development of a clutch since none was available for this power level. After review of the various proposals, the committee voted to select the Hydromantic transmission, but also to study the torque converters as a possible alternate system.
In August 1940, a contract had been signed with the Baldwin Locomotive Works for the design and construction of a pilot heavy tank to be followed by the manufacture of 50 production models. As mentioned earlier, the new vehicle had been designated as the heavy tank T1 by OCM 15946 on II July 1940. This was the designation assigned to the vehicle for which the Hydromantic transmission was proposed. However, further studies by the General Electric Company indicated that a gas-electric drive could be developed that would not increase the weight of the tank by more than two tons. Since such a drive would have numerous advantages, it was recommended by OCM 16477 that an electric drive and steering mechanism be developed for installation in the pilot T1. When this equipment was installed, the vehicle was to be redesignated as the heavy tank T1E1.
Fallowing the demonstration, the tank was torn down and numerous changes were made as a result of the initial tests. The four torque converter radiators were combined into two units and the two engine oil cooling radiators were combined into a single unit greatly simplifying the plumbing in the engine compartment. The exhaust manifold was moved from the front to the rear of the Wright G-200 engine and mufflers of a new type were installed. These were located inside the engine compartment and exhausted into the slip stream of the engine cooling fan. The rear end of the hull was rebuilt to simulate the proposed production configuration.
Armament
The production turret replaced the cupola for the tank commander with a flat double door hatch as on the medium tank M4. The rotating ring on this hatch was fitted with either a .30 caliber or .50 caliber antiaircraft machine gun, depending upon the Armored Force policy at the time. The rotor mounted .50 caliber machine gun in the rear of the pilot tank turret was eliminated. The pistol port in the rear turret wall was retained, but it was shifted toward the right side.
Models
With the United States at war, the pressure increased to get the new heavy lank into production. Following the precedent set with the medium tank M3, it was decided to release the T1E2 for production prior to the completion of the test program. Such an early release was expected to produce tanks undesirable features. Any necessary changes resulting from the test program could be introduced later without severely disrupting the production program. Such a policy was already producing M3 medium tanks to meet the critical needs of the British in addition to the American training program. To meet the expected quantity requirements, it was considered necessary to use welded as well as cast hulls and the combination of the General Motors diesel engine and the Hydramatic transmission was proposed as an alternate power train.
On 14February 1942, OCM 17812 sorted out the designations for the different versions of the heavy tank. These were as follow:
- Heavy tank T1 - Cast hull. Wright G-200 engine. Hydramatic transmission
- Heavy tank T1KI - Cast hull, Wright G-200 engine, GE electric drive
- Heavy tank T1E2 - Cast hull, Wright G-200 engine, Twin Disc torque converter
- Heavy tank T1IE3 - Welded hull, Wright G-200 engine, Twin Disc torque converter
- Heavy tank T1E4 - Welded hull, four CM 6-71 diesel engines, two Hydramatic tank transmissions
The first production M6 was accepted at the Baldwin Locomotive Works in December 1942. A production pilot M6 A1 was completed by the Fisher Body Division of General Motors, but the production contract at Fisher was cancelled. All of the 40 production tanks were assembled at Baldwin. They consisted of 8 M6 s, 12 M6 Als, and 20 T1E 1s with the last tank, a T1E1, being delivered in February 1944.
With the T1E1I and T1E2 pilots and Fisher's production pilot M6A1, the overall total for the series was 43 tanks.
Historical Gallery
Sources and External Links
| Light Tanks | |
| Medium Tanks | |
| Heavy Tanks | |
| Tank Destroyers | |
| Self-Propelled Artillery |
| USA | |
| UK | |
| Germany | |
| USSR | |
| China | |
| Japan |
