Mouse over "
[Client Values; Actual values in
|2 450 000 Cost|
|15001600 HP Hit Points|
|68.05/69.765.74/74 t Weight Limit|
- Operador de radio
|650650 hp Engine Power|
|38/12 km/h Speed Limit|
|2628 deg/s Traverse|
|9.55Error con la expresión: Operador < no esperado hp/t Power/Wt Ratio|
|160/80/80 mm Hull Armor|
|100/80/80245/120/80 mm Turret Armor|
|280/280/370280/280/370 HP Damage|
|203/237/44203/237/44 mm Penetration|
|r/m 7.69 r/m 7.69 Rate of Fire|
See here, here, or here for more information.
See here, here, or here for more information.
▲Error con la expresión: Operador < no esperado
See here, here, or here for more information.
▲Error con la expresión: Operador < no esperado Damage Per Minute
With 50% Crew: 0.421 m
With 50% Crew: 0.421 m
|s 2.5 s 2.5 Aim time|
|2727 deg/s Turret Traverse|
|360° Gun Arc|
|-8°/+15°-8°/+15° Elevation Arc|
|7272 rounds Ammo Capacity|
|Error con la expresión: Operador * no esperadoError con la expresión: Operador * no esperado % Chance of Fire|
|m 380 m 390 View Range|
|m 310 m 710 Signal Range|
- Stationary: 4.6%
- When Moving: 2.3%
- When Firing: 1.1%
- On Hard Ground: 0.96
- On Medium Ground: 1.15
- On Soft Ground: 2.21
Dispersion Change Values
- Turret Contribution
- Rotation: 0.12
- Shot Recoil: 2.88
- Suspension Contribution
- Acceleration: 0.17
- Turning: 0.17
With 100% Crew
El carro más fuertemente blindado portando el cañón anticarro más potente. El vehículo tenía problemas como la sobrecarga de la suspensión y el grupo transmisión-motor, así como una masa general excesiva. Al enfrentarse a vehículos enemigos a larga distancia, el Tiger II poseía una ventaja decisiva en términos de cañón y protección del blindaje. Sin embargo, debido a su excesiva masa, baja durabilidad del motor y la transmisión y el pequeño número de vehículos fabricados, el Tiger II no tuvo un impacto significativo en el resultado de la guerra.
Being one of the most feared tanks in the Second World War, The "Königstiger" (or "King Tiger", as the Allies would call it) operates average in stock configuration; but with proper positioning, it is capable of bouncing shells off its sturdy sloped front armor, provided that its lower front plate is hidden at all times as it is only 100mm thick. It sports a workable level of mobility although the weak engine makes climbing slopes very slow. All in all, this tank is a decent machine at long-range combat, with superior accuracy, good penetration, and a balanced alpha damage.
The Tiger II leads to the E 75.
Modules / Available Equipment and Consumables
|Turret||Turret Armor (front/sides/rear)
|Turret Traverse Speed
|VIII||Tiger II Turm Nr. 1-50||100/80/80||27||380||9638||28320|
|IX||Tiger II Serienturm||245/120/80||27||390||10938||52370|
|Chance of Fire on Impact
|Maybach HL 210 TRM P45||0||35500|
|Maybach HL 230 TRM P45||0||54000|
|VII||Tiger II Versuchs-Serie||69.7||26||0||22350||20080|
Pros and Cons
- Relatively painless stock grind - The 8.8cm is still very competitive in terms of RoF and DPM.
- Upper glacis can bounce Tier 8 heavy tank guns reliably.
- Great penetration and accuracy with above-average DPM and acceptable alpha damage on the top 10.5 cm gun.
- Nice view range and superb reload time compared to most Tier 8 heavies.
- Relatively good gun depression and surprisingly good hull-traverse despite mobility issues
- Upper glacis can only bounce tier 8 guns reliably, any gun with about 250 pen can go right through it.
- Poor armor except upper glacis and gun mantlet, lower glacis very weak. Large target, poor camo values.
- Sidescraping not as potent as the Tiger, due to weak, unimproved side armor. Vulnerable to flanking.
- Engine is very underpowered for the tank's weight, resulting in generally low mobility.
- Stock and top turret are rather easy to penetrate through the turret front; turret cheeks, cupola & roof can be overmatched.
The Tiger II more or less plays like the Tiger I, but with greatly improved armor. The fast reload-time, rivaling the T32 and the 110, is a definite asset at any range; however as with the Tiger I it is recommended that you try to deal damage from afar. The Tiger II's sides and lower front plate are too vulnerable in a brawl, and the turret roof gets overmatched by the common 122 mm Russian guns reliably at close range. What the Tiger II lacks in speed it makes up for with its above-average hull-traverse. The Tiger II can turn fast enough to respond to flankers or flank heavies that cannot turn fast enough. The Tiger II is one of the tanks that are a challenge for many higher tiers. Tier IX tanks treat this tank as a danger, while quite a few tier X tanks treat it seriously. That does not mean that this tank can be played as a brawler in high tier matches. Make use of the well-engineered armor and the superior accuracy of its gun, high penetration and (uncommon for Germans) good gun depression, use cover and fight at range. If played well, this tank can fight any tank of the same tier and win.
Although frowned upon, brawling in this tank can be done, however the rather mediocre armor for the Tiger II's size (and its massive lower glacis for that matter) make it difficult.
- If you are at the top of the list
- You are going to have a huge impact on the outcome of the battle. Don't be surprised if many of your team tanks follow you wherever you go. Plan to spearhead the main attack. If you're forced into a defensive role, go where your line is weakest.
- Your armor will prove quite frustrating to enemy tier 6s and even some tier 7s, but be wary of any fast moving mediums that try to flank you. You may be able to turn faster than most heavies, but that doesn't mean you are flank-proof.
- Opposing IS-3s and other heavy tanks can be dealt with relatively easily with the 10.5cm.
- Despite the apparent role of the Tiger II, it can occasionally prove useful to facehug, however this is NOT recommended against higher tier tanks, as they will still be able to punch straight through your armor.
- If you are at the bottom of the list
- Then the vast majority of enemy tanks will be tiers 9 and 10. You'll need to target vulnerable areas of the enemy tanks. Otherwise, you won't stand a chance. Try to stay alive and you might make more of a difference once the strongest tanks kill each other off. The accuracy and reload-time help immensely.
- The 'Peek-a-boom' tactic, relied upon by the IS series tanks, can prove very helpful for the Tiger II and the tanks it leads to, specifically at medium or long range, this is a good time to learn this skill as it becomes extremely potent in the E75 and E100.
- The upgraded engine carries over from the Tiger.
- The FuG7 radio is common on many German vehicles and changes are you've probably already researched this one.
- Upgrading the turret is a good place to start, due to the increased front armor and DPM. You can mount it with the stock suspension, but you'll have to either forego the top engine and equipment, or temporarily install the enhanced suspension. Otherwise you'll need to research the suspension first, leaving you with a vulnerable turret for quite a while.
- Mounting the short 10,5 cm KwK 45 L/52 is ill-advised, because its penetration and accuracy are lower than 8,8 cm's as well as DPM, and the quadrupled shell cost will prove to be an expensive decision. If credits aren't a problem, then you could mount the short 105 for the the higher damage per round.
The German point of view was that, at the rate of evolution in armored warfare, superiority could only be maintained by one year, at maximum. Things being as they were in early 1943, the Tiger I and the Panther would be enough, but in order to preserve the superiority in 1944, a new heavy tank would be necessary. On January 1943, Hitler decided that the new Tiger would have the longer Rheinmetall 88 mm Flak 41, and to have 150 mm of front armor and 80 mm of side armor: the angle of the armor plates resulting in the new tank looking very similar to the PzKpfw. V Panther.
Once again, Porsche and Henschel were asked for designs which were to incorporate the latest sloped armor and the installation of the longer Rheinmetall 88 mm Flak 41. However, there was the sensitive question, for Krupp, of mounting an archrival's gun in their turret. On 5th February 1943, Krupp was awarded the contract for the development of the 88 mm KwK 43 L/71, a new gun specifically designed for the successor of the Tiger I. The only similarity between this gun designed by Krupp and the Rheinmetall Flak 41 was that the same penetration values were achieved when the same shell was fired with the same initial muzzle velocity. All other characteristics of the two guns were different. Following the main specification to achieve equivalent armor penetration, Krupp completely redesigned the gun for mounting in a tank turret. As compared to the Flak 41 L/74, the KwK 43 L/71 was shorter with different rifling and had a muzzle brake to retard recoil. In addition it had shorter, fatter recoil cylinders to fit inside a turret, had an air blast system fitted to evacuate fumes from the gun directly after firing, and chambered a shorter (but thicker) cartridge case for easier loading inside a turret.
Some Tiger IIs were used during the Battle of the Bulge, 6 months after D-Day.
Krupp Turrets and Parts Standardization with the Panther II
Porsche updated its Tiger I design, and this time, was so sure of winning the contract that it ordered a first batch of 50 turrets from Krupp. Unfortunately, the Porsche ideas of electric transmission were once again rejected, as the supplies of copper were too small, and the contract went once again to Henschel. However, since 50 early-style turrets had already been made, they were fitted to the first units produced. The curved front plate created a serious shot trap, which deflected incoming rounds down into the driver's compartment. The bulge for the cupola was also a weak area in the turret side-armor. Krupp then modified the turret, and the new design eliminated those deficiencies, was simpler, and offered better protection while providing room for 6 more rounds of ammunition. The new Serien-Turm (series production turret) designed for the Tiger II had a 180 mm thick front plate, 80 mm sidewalls, and 40 mm roof. The gun mantlet was specifically designed to be immune to attack or being jammed. This new design did not create high explosive blast pockets and prevented deflections of projectiles down to the deck. The early-style turret is commonly referred to as the 'Porsche Turret'; and the series production turret, as the 'Henschel turret'. However, both turrets were designed and built by Krupp, and this classification leads to misunderstandings. It is best to call the first 50 turrets "early-production turrets", and from the 51st on as "series production turrets" (Serien-Turm).
In February 1943, WaPrüf 6/III drew a requirement for an extensive unification of the specification in order to standardize as many parts as possible with the Panther II, which never went into production, and the subsequent delays caused the production to never reach the planned levels until December 1943. The PzKpfw. Tiger Ausf. B was a massive and formidable vehicle, designed to dominate the battlefield. The new hull design for the VK 45.03 (H) consisted of sloping plates for increased protection. The front glacis plate was 150 mm at 50°, front nose plate 100 mm at 50°, superstructure side plates 80 mm at 0° vertical, tail plate 80 mm at 30°, deck plates 40 mm at 90° horizontal, and rear belly plate 25 mm horizontal. Forty-eight rounds of ammunition for the main gun were stored horizontally in panniers on each side of the hull. The rounds were stowed in three groups, on both sides. Each group was separated by sliding metal panels. An additional ten to 16 rounds were stacked loose on the turret floor.
The whole running gear was redesigned. For the first time, a staggered running gear with nine pairs of rubber-spring road wheels, of 800 mm diameter, was used on each side. These road wheels consisted of two strong sheet-steel rims attached to a wheel disk of steel between two rubber rings under very high pressure. The drive sprocket was similar to that of the Tiger I, but were built more strongly. The road-wheel cranks were single drop-forged pieces and much strenghtened. The crank arrangement resembled those of the Panther without rubber, but with layered conical springs. Compared to the Tiger I, the torsion bars were strenghtened and fitted with toothed heads. They no longer differed in diameter, so they could not be fine tuned. The combat tracks, which weighed 3.2 tons each, were 800 mm wide, thus providing an acceptable ground pressure (when the tracks sunk to 20 cm) of 0.76 kilograms per square centimeter. Once again, loading tracks, 600 mm wide, had to be used for rail transportation. The combat weight of the vehicle was 68.5 metric tons.
The Panzerkampfwagen Tiger Ausf. B powerplant was the Maybach HL 230 P 30, a 12-cylinder engine also used on the Panther, producing 700 HP at 3,000 rpm, then through an 8-speed Maybach transmission and was designed to provide a maximum speed of 41.5 km/h. The OLVAR gearbox required a shifting process that was just like that of a manual transmission with power interruption. Its trouble free operation depended largely on the ability and calm (even in combat) of the driver. However, the easily shifted OLVAR gearbox and easily steered two-radius steering gear definitely improved the driver's job.
Thomas L. Jentz, in "Germany's Tiger Tanks: Vol.2 - VK 45.02 to Tiger II" (Schiffer, 1998), presents a list of official names given to the Tiger II, ordered by date, from 1942 to 1943:
Wa Prüf 6 Designations:
VK 45.02 (H) 15 April 1942
Tiger II for the VK 45.02 (H) 18 September 1942
Tiger III (VK 45.03) 12 October 1942
Henschel Tiger B 08 January 1943
Tiger II for the VK 45.03 03 March 1943
Pz.Kpfw. Tiger Ausf B 02 June 1943
Pz.Bef.Wg.Tiger Ausf.B 02 June 1943
The official designations were Panzerkampfwagen Tiger Ausf. B and Panzerbefehlswagen Tiger Ausf. B (for the command version), which originated in a WaPrüf 6 (Waffenprüfamter 6 - Weapons Development and Testing Department - "6" being the number that corresponded to "Tanks and other Vehicles") order dated 2 June 1943. The official designation was frequently shortened to Tiger B. The full titles Panzerkampfwagen Tiger (8,8 cm Kw.K. L/71) (Sd.Kfz. 182) and and Panzerbefehlswagen Tiger (Sd.Kfz. 267 und 268) Ausf. B were specified by the Inspecteur der Panzertruppen (In6) for use in training and maintenance manuals, as well as in the K.St.N. (organization and equipment tables). The suggestive name Königstiger (King Tiger) was an unofficial designation first used by the Reichsministerium für Bewaffnung und Munition, in 11 December 1944. This was never an officially accepted designation during the war by either the Panzertruppen or the Waffenamt.
The frontal armor of the Tiger II provided the best protection possible; the front turret was 180 mm inclined at 10 degrees from the vertical, compounded with a specially-designed mantlet, which was immune to penetration and being jammed. The glacis plate was a 150 mm thick plate inclined at 50 degrees from vertical, so the actual protection given by the armor plate inclination was more than 230 mm. There is no proof that this frontal armor was ever penetrated in combat, even though the British 17 Pounder, when using a special APDS ammunition, could theoretically penetrate the Tiger II front armor (front turret and lower front hull, only - the 17 Pounder could not penetrate the Tiger II glacis plate), but those APDS rounds were terribly inaccurate and had a tendency of ricochet off inclined armor such as was the lower front hull (100 mm inclined at 50 degrees from the vertical) of the Tiger II. Even the side and rear armor protection was sufficient to eliminate any serious threat from the American 75 mm or the Russian 76 mm tanks guns. The hull was welded, as was that of the Tiger I, but the armor was better sloped, using the experience of the T-34. Hull layout was similar to that of the Panther, and the large turret was roomy, although the gun came right back to the rear wall and made a complete partition longitudinally. The thickness and angles of the armor protection are shown in the Table below :
The long and powerful 88 mm KwK 43 L/71 gun could outrange and outshoot the main armament of nearly all Allied tanks, and this allowed the Tiger II to stand off and engage targets as it choose. Besides that, the 88 mm KwK 43 L/71 was a very accurate gun, being capable of first-round hits at well over 1000 meters. Given its high muzzle velocity, barrel wear was a difficulty with this gun, but this was solved by building the barrel in two sections, so it was possible to change the faster-wearing part easily. The tables below represent the penetration capability of penetrating armor at an angle of 30 degrees from the vertical, and the probability of hitting a target representing the front of a tank.
During World War II, the Armor Piercing (AP) round relied on its own weight to penetrate the enemy's armor. The higher the muzzle velocity, the more penetration any kind of AP round would have, all other variables remaining constant. The Armor Piercing Capped, Ballistic Capped (APCBC) round relied not only on its own weight to penetrate the enemy's armor, but was also filled with high-explosive that caused great internal damage. The Armor Piercing Composite Rigid (APCR) round was made with a tungsten core. For flight performance effects and to aid the shot from shattering against armor plating, the APCR round was surrounded by a ballistic cap. The HEAT round, which was based on the hollow charge principle, used a directed explosion, rather than mass or weight, to penetrate armor. The explosion is channeled forward into a stream, which cuts through armor, melting it along the way and including it in the stream.
The designation 88 mm KwK 43 L/71 means that the diameter of the bore (caliber) of this gun is 88 mm, this is a Tank Gun (Kampfwagenkanone), that the year the development of this gun was finalized was 1943, and that the length of the gun equals 71 times the diameter of the bore (caliber) of the same gun. This was the main gun installed on the Tiger II. Of the total ammunition load of 86 rounds (80 for the Tiger II with "early-style" turrets), the recommended ratio was 50% Pzgr.39/43 (APCBC) and 50% Sprgr. (high-explosive shells). The Gr 39/3 HL (HEAT) were rarely used. When available, but very rarely due to a severe shortage, a few Pzgr.40/43 (APCR) rounds were carried for use against the heaviest armored Russian tanks and tank destroyers.
Accuracy of the 88 mm KwK 43 L/71
The sights for most of the Tigers II that actually saw combat was the articulated, monocular Turmzielfernrohr 9d mounted parallel and on the same axis as the main gun. The gunner could select two magnifications, 2.5x and 5x. The lower magnification provided a wider field of view for target identification. The higher magnification assisted in precise aiming at long ranges. Two adjustable range scales allowed the gunner to register the exact range to the target. The range scale for the Pzgr.39/43 was graduated at 100 m intervals out to a range of 4000 m and the second range scale for the Sprgr.43 was graduated out to a range of 6000 m.
Numerous statements have been made that the Tiger II was too heavy, too big, too slow, "a casemate", etc. One is left with the impression that it was lucky to move at all. These banal generalities, stated as incontrovertible facts, are never substantiated by actual specifications, test reports, or after-action accounts from the units that used the Tiger II. In spite of these frequently repeated remarks, the capability of the Tiger II to negotiate obstacles and cross terrain was equivalent to, or better than, most German and allied tanks.
The Tiger II initially experienced numerous automotive problems which required a continuous series of minor modifications to correct. These problems can be traced to two main causes; leaking seals and gaskets and an over-taxed drive train originally designed for a 40 metric ton vehicle. The problem of keeping a Tiger II in running condition was compounded by a shortage of skilled drivers, many of whom may have never experienced driving any vehicle prior to entering the service. In addition, they were provided only limited driver's training, and then usually on a different type of panzer, and received their own Tiger II usually within a few days before being shipped to the front. But, with mature drivers, taking required maintenance halts, and modification of key automotive components, the Tiger II could be maintained in a satisfactory operational condition. Status reports from the Western Front, dated March 1945, showed that the percentage of Tigers operational at the Front was about equal to the PzKpfw IV and as good as or better than the Panther.
Following an initial order for three prototype chassis, an initial production series of 176 Tiger IIs was ordered in October 1942. Following cancellation of the Porsche Tigers in November 1942, the contract (with Henschel) was quickly expanded by an additional 350. Later extensions to the contracts increased the total order to over 1500. In accordance with the original production plans from October 1942, the first Tiger II was to be completed in September 1943. The number produced each month was to be expanded to reach a target of 50 per month in May 1944. This production schedule satisfied the Inpekteur der Panzertruppen, who wanted 100 Tiger II available for a spring offensive in 1944. Due to delays, the first prototype V1 was accepted by Waffenamt inspector in November 1943. Two further prototypes, V2 and V3, and the first three production series Tiger IIs were accepted in January 1944. The production run continued through March 1945 for a total of three prototypes and 489 production-series Tiger IIs produced by Henschel.
Only one model was built, and despite the heavy Allied bombing, Henschel always had at least 60 vehicles being assembled on its tank assembly line floors at any time. At the peak, it was taking only 14 days to complete a Tiger II. Severe fuel shortages and heavy Allied bombing forced the factory to use bottled gas for testing, as all available fuel was supplied for operations.
The Tiger II and Entfernungsmesser (Range Finder) Development
The war in North Africa and in the large plains of Russia had shown that range measurement in wide areas such as the desert or the Russian steppes would be most useful, as guessing the range could be misleading. When the tank halts before firing and the range to the target is under 1000 meters, the elevation of a high velocity gun such as the 88mm KwK 43 L/71 (whose muzzle velocity was equal or more than 1,000 m/s) is not affected much by range, and range measurements can be dispensed with. The great advantage of using a range finder lies in the possibility of opening fire at longer ranges. Without the range finder, precious time and ammunition were lost when the elevation of the gun must be corrected by observing the effect of fire.
As the tank commander was preoccupied with other tasks, the gunner would take charge of the range finder. After locating the target with the periscope and aligning the target in the sight, the gunner operates the range finder, reads the range, and adjusts the range scale to the correct range, which provides the additional elevation associated with the range. The range scale was seen at the bottom of the field of the right eyepiece. It was graduated in meters from 550 to 20,000.On 28 February 1945, the armor manufacturers were asked, when turrets were produced, to mount the Entfernungsmesser (range finders). It was stated that they should strive to complete their first turret by 31 March and Krupp planned to start by mid-July 1945. Therefore, the effort was initiated too late to complete any Tiger IIs with range finders before the factory in Kassel fell into the hands of Allied troops.
Historical Accuracy Errata
The 10,5 cm KwK L/68 blueprint was merely a proposal that was rejected by the development department. The weapon itself had also been rejected for service by the Wehrmacht.
- No historical records exist of a 10,5 cm KwK L/52 gun being developed for the Tiger II.
- The Tiger II's engine was a redesigned HL 230, giving it 900 hp instead of 700, in the Henschel version (the top configuration).
- Dark yellow was the standard colour on all German armoured vehicles from February 1943. In World of Tanks, however, the Tiger II is in panzer gray.
Sources and External Links
Chamberlain, P., H.L. Doyle and T.L. Jentz, 1999, Encyclopedia of German Tanks of World War Two - The Complete Illustrated Dictionary of German Battle Tanks, Armoured Cars, Self-Propelled Guns and Semi-Tracked Vehicle, Cassel Reprint, London, 272p, ISBN:9781854095183.
Doyle, H. and T. Jentz, 1993, Kingtiger Heavy Tank 1942–45, New Vanguard Series 1, Osprey Publishing, Oxford, 48p, ISBN:9781855322820.
Doyle, H.L. and T.L. Jentz, 1997, Germany's Tiger Tanks: VK45.02 to TIGER II Design, Production & Modifications, Schiffer, Atglen, PA, ISBN:9780764302244.
Higgins, D.R., 2011, King Tiger vs IS-2 - Operation Solstice 1945, Duel Series 37, Osprey Publishing, Oxford, 80p, ISBN:9781849084048.
Jentz, T.L. and H.L. Doyle, 2001, Panzer Tracts - No.6 Schwere-Panzerkampfwagen D.W. to E-100 including the Tigers, Jentz, Boyds, MD, ISBN:9780970840714.
Spielberger, W.J. and H.L. Doyle, 2007, Tigers I and II and Their Variants, Schiffer, Atglen, PA, 256p, ISBN:9780764327803.
- PanzerWorld.com History and specifications of German tanks.
- AchtungPanzer.com History and details of Panzer and Panzertruppe.
- Konigstiger Photos & history.