Pz.Kpfw. III Ausf. E
Pz.Kpfw. III Ausf. E
Mouse over "
35.000 Kosten |
40585 HP Struktur |
14.65/15.4510.81/19.35 t Höchstgewicht |
- Kommandant
- Richtschütze
- Fahrer
- Funker
- Ladeschütze
320440 hp Motorleistung |
68/20 km/h Höchstgeschwindigkeit |
4044 deg/s Wendegeschwindigkeit |
21.8440.7 hp/t Leistungsgewicht |
NoNo Pivot |
// mm Wannenpanzerung |
16/14.5/14.530/30/30 mm Turmpanzerung |
AP/APCR/HE
AP/APCR/HE Granaten |
36/36/4270/70/90 HP Schaden |
40/74/1860/96/25 mm Durchschlag |
r/m ▲
26.09 r/m Standard Gun ▲
24 Feuerrate Standard Gun |
▲
Standard Gun
▼
Standard Gun
▲
939.24 Standard Gun ▲
Standard Gun
▼
Standard Gun
▲
1680 Schaden pro Minute Standard Gun |
m ▲
0.46 m With 50% Crew: 0.57 m ▲
0.48 Genauigkeit With 50% Crew: 0.595 m |
s 1.7 s 2.3 Einzielzeit |
4435 deg/s Turmdrehgeschwindigkeit |
360° Waffenwinkel |
-10°/+20°-10°/+20° Richtwinkel |
360135 rounds Munitionskapazität |
2020 % Brandwahrscheinlichkeit |
m 320 m 320 Sichtweite |
m 310 m 455 Funkreichweite |
Der Pz.Kpfw. III Ausf. E ist ein deutscher leichter Panzer der Stufe 3.
Der Auftrag zur Entwicklung eines 15 Tonnen schweren Kettenfahrzeugs mit Geschützbewaffnung wurde 1935 erteilt. Trotz des hohen Gewichts der ersten Serienausführung, dem Pz. Kpfw. III Ausf. E mit 19,5 Tonnen wurde das Fahrzeug als Erfolg gewertet. Schließlich stieg die Anzahl der Fahrzeuge auf 96. Weitere Ausführungen waren beliebter und der Pz. Kpfw. III wurde in der Wehrmacht das Fahrzeug mit der höchsten Stückzahl.
Der Pz.Kpfw. III Ausf. E führt zum StuG III Ausf. B, und dem Pz.Kpfw. III Ausf. J.
Module / Verfügbare Zubehörteile und Verbrauchsgegenstände
Module
Stufe | Motor | Leistung (hp) |
Brandwahrscheinlichkeit (%) |
Gewicht (kg) |
Kosten ()
| |
---|---|---|---|---|---|---|
IV | Maybach HL 108 TR | 320 | 20 | 450 | 9460 | |
IV | Maybach HL 120 TR | 350 | 20 | 510 | 10430 | |
IV | Maybach HL 120 TRM | 440 | 20 | 510 | 19900 |
Verfügbare Zubehörteile
Verfügbare Verbrauchsgegenstände
Player Opinion
Pros and Cons
Pros:
- Good Power/Weight ratio means good acceleration
- Good hull traverse speed
- Very good top speed
- Good penetration, damage and rate of fire
- Good all-round armor
Cons:
- Very inaccurate guns
- Higher chance of engine fire
- Low maneuverability at speed
- Upgraded turret slows the tank down
Performance
The Pz.Kpfw. III Ausf. E boasts an excellent top speed and maneuverability. It excels in the scout role, and after learning the ropes in tiers 1 and 2, players should find this to be an enjoyable next step. After receiving a HD model in patch 9.16, the Pz.Kpfw. III Ausf. E (formerly Ausf. A) is now slightly taller, but with better hull armor. It's hull and turret armor is 30mm all-round (except for the rear of the hull), which is effective against machine guns and low tier opponents. It does have drawbacks, like the stock gun which is not much more powerful than those found on the previous two tiers. However, once fully upgraded, it is more than a match for the equivalent Soviet and American tanks. It also excels in an anti-scout role such as taking down faster tanks such as the BT-7 that it can penetrate consistently. To make up for the longer aim time, it can take up a "scout-sniper" role in that it can first rush ahead to spot the enemies, and as soon as it makes first contact with the enemy it can then escape with its good speed and then take up a better sniping position to take out the arriving enemies. The gun can and will absolutely decimate hordes of enemies unaware of the tanks position and will rarely need to be well aimed considering the 5cm gun used.
Early Research
- The 2cm Flak 38L/112 gun and the FuG-7 and FuG Spr.1 radios carry over from the Pz.II and should be mounted if already researched.
- Prioritize the 2nd turret which must be mounted before next mounting the 5cm top gun.
- Tracks next followed by the 2nd and 3rd engines.
- Last, but not least, research and mount the Tier-8 radio for great signal range if not carried over from the Pz.II.
Suggested Equipment
Galerie
Historical Info
Under General Heinz Guderian, a project was commenced to solicit designs for two new types of tank. One would be a support tank and would be armed with a large caliber gun. The other would be mounting an anti-tank gun and 2 machine guns. The former would become the Pz.Kpfw. IV. The latter would become the Pz.Kpfw. III.
Late in 1935, development proposals were requested from MAN (Nurnberg), Daimler-Benz AG (Berlin-Marienfelde), Rheinmetall-Borsig (Berlin), and Krupp AG (Essen) for a 15-ton fully-tracked vehicle, and in the interest of security to be named Zugfuhrerwagen (ZW): platoon commander’s vehicle.
The vehicle's development began with a series of arguments between the Waffenamt (the Ordnance Department) and the Inspector for Mechanized Troops over its armament. The Waffenamt had chosen the 3.7cm cannon while the Inspector for Mechanized Troops demanded 5cm gun. Ultimately, the 3.7cm was chosen as the vehicle's main armament because the infantry was already equipped with the standard 37mm Pak 35/36 L/45 anti-tank gun. This meant that only one type of gun and ammunition needed to be produced, although the turret and turret ring were capable of mounting the heavier 5cm gun.
Since this new vehicle was to be used in the forward echelons of assault tank formations, it was decided to require heavier armor in the front than in the rear. Top speed was specified to be 40km with a crew of 5 men, with a new turret based on an enlarged version of that found on the Pz.Kpfw. II. The Pz.Kpfw. III Ausf. A was the first German Tank to use a new intercom system for in-tank communications, which was fitted to all later Panzer tanks, and was highly successful.
Eventually, the Daimler-Benz design was selected and ten prototypes were constructed in 1937. Some sources state that as many as fifteen were constructed, but only eight were armed. These eight equipped units of the 1st, 2nd, and 3rd Panzer Divisions and took part in Anschluss, the take-over of Sudetenland and the Polish Campaign.
The Pz.Kpfw. III Ausf. E was the first dramatic change to the tank's design. The tank's suspension was redesigned from leaf-springs to torsion-bars, and now had six roadwheels per side instead of five. The armor was also upgraded from 15mm of armor on all sides to 30mm of armor on all sides.